Banner-1

Cast Iron Single Disc Swing Check Valve

Short Description:

  • sns02
  • sns03
  • youtube

1. Working pressure: 1.0Mpa/1.6Mpa/2.5Mpa

2. Working temperature:
NBR: 0℃~+80℃
EPDM: -10℃~+120℃
VITON: -20℃~+180℃

3. Face to face according to ANSI 125/150

4. Flange according to EN1092-2, ANSI 125/150 etc.

5. Testing: DIN3230, API598

6. Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.


dsv product2 egr

Product Detail

Product Tags

Product Video

Product Description

Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the flow of water from bottom to top, and pay attention to whether the installation direction is correct during installation.

The wafer swing check valve is an economical alternative to the traditional flanged swing check valve. The lightweight wafer type valve consists of a 304 stainless steel disc, and on reverse flow will have a positive shutoff owing to the resilient seat.

  • Low Head Loss
  • Pressure rating – 16 Bar
  • Available in sizes 50mm – 400mm

We will uphold the “excellent quality, satisfactory service” purpose, and strive to become your ideal business partner.
For Factory directly DUCTILE IRON/CAST IRON WAFER SINGLE DISC CHECK VALVE PN16, we sincerely hope to establish some satisfactory associations along with you. We will keep you informed of our progress and establish a stable cooperative relationship with you.

Factory directly DIN or ANSI Single Plate Check Valve, Single Disc Check Valve, high output, good quality, timely delivery, to ensure your satisfaction.
We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order, please feel free to contact us, working with us will save you money and time.

Product Parameter

Product parameter2Product parameter1

NO. PART MATERIAL
1 Body GG25/GGG40/SS304/SS316
2 Ring Steel
3 Axle SS304/SS316
4 Spring Stainless steel
5 Gasket PTFE
6 Disc WCB/SS304/SS316
7 Seat ring NBR/EPDM/VITON
8 Gasket NBR
9 Screw Steel
NO. Part Material
DN(mm) 50 65 80 100 125 150 200 250 300 350 400
 L(mm) 44.5 47.6 50.8 57.2 63.5 69.9 73 79.4 85.7 108 108
ΦE(mm) 33 43 52 76 95 118 163 194 241 266 318
Φ(mm) PN10 107 127 142 162 192 218 273 328 378 438 489
PN16 107 127 142 162 192 218 273 329 384 446 498

Product Show

CAST IRON SINGLE DISC SWING CHECK VALVE
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Stainless Steel Single Disc Swing Check Valve

      Stainless Steel Single Disc Swing Check Valve

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in verti...

    • Big Size Wafer Type Lift Check Valve

      Big Size Wafer Type Lift Check Valve

      Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very...

    • Thin Single Disc Swing Check Valve With Spring

      Thin Single Disc Swing Check Valve With Spring

      Product Video Product Description Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″ Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications. An economical test valve that saves room. Either vertically (only upwards) or horizontally installed. Key features: C...

    • BS5153 Swing Check Valve

      BS5153 Swing Check Valve

      Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13  SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN...

    • Small Size Wafer Type Lift Check Valve

      Small Size Wafer Type Lift Check Valve

      Product Video Product Description Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but a...

    • Thin Single Disc Swing Check Valve

      Thin Single Disc Swing Check Valve

      Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2″ to 24“. Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Steel body Wafer ...