Banner-1

Small Size Wafer Type Lift Check Valve

Short Description:

  • sns02
  • sns03
  • youtube

1. Working pressure: 4.0Mpa

2. Working temperature: -100℃~+400℃

3. Face to face according to DIN3202 K4

4. Flange according to EN1092-2, etc.

5. Testing: DIN3230, API598

6. Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.


dsv product2 egr

Product Detail

Product Tags

Product Video

Product Description

Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but also at low valve pressure.

  • Size: 1/2″ – 4″ (DN15 ~ DN100)
  • Pressure: PN1.0Mpa ~ 4.0Mpa (Class150 ~ 300)
  • Medium applicable:  Water, Steam, Oil, Corrosive mediums containing nitric acid and urea etc.

Product Parameter

Product parameter1                                            Product parameter2

NO. PART MATERIAL
1 Disc SS304/SS316
2 Body SS304/SS316/Brass
3 Bolts SS316
4 Spring cover SS316
5 Spring SS316
DN(mm) 15 20 25 32 40 50 65 80 100
ΦDmm) 53 63 73 84 94 107 126 144 164
ΦE(mm) 15 20 25 30 38 47 62 77 95
F(mm) 16 19 22 28 31.5 40 46 50 60

Product show

LIFT CHECK VALVE (2)
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Flanged Ball Check Valve

      Flanged Ball Check Valve

      Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is...

    • Stainless Steel Single Disc Swing Check Valve

      Stainless Steel Single Disc Swing Check Valve

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in verti...

    • Wafer Silent Check Valve

      Wafer Silent Check Valve

      Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 1...

    • Threaded Ball Check Valve

      Threaded Ball Check Valve

      Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0~80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alu...

    • Cast Iron Single Disc Swing Check Valve

      Cast Iron Single Disc Swing Check Valve

      Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to...

    • Big Size Wafer Type Lift Check Valve

      Big Size Wafer Type Lift Check Valve

      Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very...