Banner-1

DIN3202-F6 Swing Check Valve

Short Description:

  • sns02
  • sns03
  • youtube
  • whatsapp

1. Working pressure: 1.0/1.6Mpa

2. Working temperature: -20℃~+120℃

3. Flange connection according to DIN2532 DIN2533 DIN 2501 EN1092

4. Face to face: DIN3202-F6

5. Design standard: DIN3356

6. Medium: Water, Steam, Oil etc.


dsv product2 egr

Product Detail

Product Tags

Product Video

Product Description

Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices.
Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed

Key features:

  • Available sizes: 2″ up to 12″.
  • Temperature range: -10°C to 120°C.
  • Pressure rating: PN16 rated
  • Low cracking pressure.
  • WRAS approved.
  • BS EN 1092-2.

Datasheet:

  • Swing Check Valve
  • Ductile Iron body
  • Flanged PN16
  • Sizes 2″ up to 12″
  • WRAS approved

Product parameter

Product parameter1 Product parameter2

NO. Part Material
1 Body GG20/GG25/GGG40/GGG50
2 Bonnet GG20/GG25/GGG40/GGG50
3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel
4 Seat Brass/Bronze/Stainless steel
5 Pin 2CR13  SS304
DN 40 50 65 80 100 125 150 200 250
L 180 200 240 260 300 350 400 500 600
D PN10 150 165 185 200 220 250 285 340 395
PN16 405
D1 PN10 110 125 145 160 180 210 240 295 345
PN16 355
D2 PN10 88 102 122 138 158 188 212 268 320
PN16
b PN10 14 14 14 17 17 19 19 22 23
PN16 18 20 20 22 24 26 26 30 32
n-d PN10 4-19 4-19 4-19 8-19 8-19 8-19 8-23 8-23 12-23
PN16 12-23 12-28
H 120 137 147 159 180 203 223 258 290

Product show

image19
Contact: Judy  Email: info@lzds.cn or phone/WhatsApp +86 18561878609.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Cast Iron Single Disc Swing Check Valve

      Cast Iron Single Disc Swing Check Valve

      Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to ...

    • Flanged Ball Check Valve

      Flanged Ball Check Valve

      Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...

    • Stainless Steel Double Disc Swing Check Valve

      Stainless Steel Double Disc Swing Check Valve

      Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and V...

    • Thin Single Disc Swing Check Valve

      Thin Single Disc Swing Check Valve

      Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2" to 24". Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Stee...

    • Big Size Wafer Type Lift Check Valve

      Big Size Wafer Type Lift Check Valve

      Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water h...

    • Threaded Ball Check Valve

      Threaded Ball Check Valve

      Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0~80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...