OEM/ODM Supplier Dual Plate Type Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
Short Description:
OEM/ODM Supplier Dual Plate Type Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the flow of water from bottom to top, and pay attention to whether the installation direction is correct during installation.
The wafer swing check valve is an economical alternative to the traditional flanged swing check valve. The lightweight wafer type valve consists of a 304 stainless steel disc, and on reverse flow will have a positive shutoff owing to the resilient seat.
- Low Head Loss
- Pressure rating – 16 Bar
- Available in sizes 50mm – 400mm
We will uphold the “excellent quality, satisfactory service” purpose, and strive to become your ideal business partner.
For Factory directly DUCTILE IRON/CAST IRON WAFER SINGLE DISC CHECK VALVE PN16, we sincerely hope to establish some satisfactory associations along with you. We will keep you informed of our progress and establish a stable cooperative relationship with you.
Factory directly DIN or ANSI Single Plate Check Valve, Single Disc Check Valve, high output, good quality, timely delivery, to ensure your satisfaction.
We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order, please feel free to contact us, working with us will save you money and time. Please feel free to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609.
Product Parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Innovation, excellent and reliability are the core values of our company. These principles today much more than ever form the basis of our success as an internationally active mid-size business for OEM/ODM Supplier Dual Plate Type Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Swedish, Latvia, Mali, Our market share of our products and solutions has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future. We've been looking forward to your inquiry and order.
By Josephine from Saudi Arabia - 2017.11.20 15:58
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Lena from Manila - 2018.06.28 19:27
Related products
-
OEM Supply Dual Wafer Check Valve - Flanged Ba...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Manufactur standard Disc Type Check Valve - Ca...
Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...
-
Professional Design Flanged Foot Valve - DIN33...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Factory Cheap Hot Check Valve - Cast Iron Sing...
Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to ...
-
China OEM Flanged Check Valve - Thin Single Di...
Product Video Product Description Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″ Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications. An economical test valve that saves room. Either vertically (only upwards) or horizontally installed. Key features: CF...
-
Short Lead Time for Ball Foot Valve - 2pcs Thr...
Product Video Product Description Application: The stainless steel 2 pieces threaded ball valves are designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases, and loose materials. Medium may flow in both directions through the ball valves. Simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: made of stainless steel 1-pc, 2-...