One of Hottest for Valve Manufacturer - DIN3352-F4 Resilient Gate Valve – Dongsheng
Short Description:
One of Hottest for Valve Manufacturer - DIN3352-F4 Resilient Gate Valve – Dongsheng Detail:
Product Video
Product Description
The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.
In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline.
Product parameter
| NO. | Part | Material |
| 1 | Body | GGG40/GGG50 |
| 2 | Bonnet | GGG40/GGG50 |
| 3 | Stem | 2Cr13/SS304/SS316/Brass |
| 4 | Disc | GGG40/GGG50 with NBR/EPDM |
| 5 | Stem Nut | Brass |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
| L | 140 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | |
| D | PN10 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 615 | 670 |
| PN16 | 405 | 460 | 520 | 580 | 640 | 715 | |||||||||
| D1 | PN10 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 | 460 | 515 | 565 | 620 |
| PN16 | 355 | 410 | 470 | 525 | 585 | 650 | |||||||||
| D2 | PN10 | 88 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 | 370 | 430 | 482 | 530 | 586 |
| PN16 | 378 | 438 | 490 | 548 | 610 | ||||||||||
| b | 17 | 17 | 17 | 17 | 19 | 19 | 19 | 22 | 23 | 26 | 28 | 30 | 30 | 32 | |
| n-d | PN10 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 8-22 | 12-22 | 12-22 | 16-22 | 16-26 | 20-26 | 20-26 |
| PN16 | 12-22 | 12-28 | 12-28 | 16-26 | 16-30 | 20-30 | 20-34 | ||||||||
| H | PN10 | 200 | 215 | 245 | 285 | 320 | 360 | 415 | 445 | 585 | 670 | 980 | 1144 | 1250 | 1366 |
| PN16 | 480 | ||||||||||||||
| C | 160 | 160 | 180 | 200 | 200 | 250 | 250 | 280 | 320 | 350 | 350 | 500 | 500 | 500 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for One of Hottest for Valve Manufacturer - DIN3352-F4 Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: America, Spain, Pakistan, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Jean Ascher from Ireland - 2017.09.22 11:32
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Myra from Turkey - 2017.04.18 16:45
Related products
-
OEM/ODM China Check Valve Manufacturer - Wafer...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
OEM Factory for Saunders Weir Type Diaphragm Va...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
-
Good Wholesale Vendors Single Disc Wafer Swing ...
Product Video Product Description Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices. Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed Key features: Available sizes: 2″ up to 12″. Temperature range: -10°C to 120°C. Pressure rating: PN16 rated Low crac...
-
Excellent quality Double Door Check Valve - DI...
Product Video Product Description Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices. Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed Key features: Available sizes: 2″ up to 12″. Temperature range: -10°C to 120°C. Pressure rating: PN16 rated Low crac...
-
Discountable price Lever Operated Butterfly Val...
Product Video Product Description Dimensions: Size : DN 50 to DN 600 Ends : ANSI150/PN10/PN16/JIS10K Specifications: Type of valve: Butterfly valve wafer type Working temperature: EPDM -10℃-+120℃ Face to Face: ISO5752 sequence Upper flange standard: ISO5211 Pressure test conform: API598 Medium: Fresh Water, Sea Water, Food Stuff, all kinds of oil etc. Materials : Body: GGG-50 ductile iron body allows installation in ANSI 150 and DIN PN 10/16 pipe flanges. Disc: Stainless steel 304 (CF8)....
-
Manufacturing Companies for Dual Plate Wafer Ch...
Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13 SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...
