Special Price for Wafer Disc Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng
Short Description:
Special Price for Wafer Disc Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment.
Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertical or horizontal piping.
Key features:
- Available in sizes: 2″ to 12“.
- Temperature range: -20°C to 200°C.
- Pressure rating: 10 Bar/16 Bar/25 Bar.
- Low cracking pressure.
- Space saving design.
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product show
Contact: Judy Email: info@lzds.cn phone/WhatsApp +86 18561878609
Product detail pictures:
Related Product Guide:
Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for Special Price for Wafer Disc Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Czech Republic, Albania, Mexico, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Quintina from Macedonia - 2018.12.11 11:26
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Phoebe from Haiti - 2017.06.25 12:48
Related products
-
Lowest Price for Single Disk Check Valve - Thr...
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...
-
Manufactur standard Lug Type Check Valve - BS5...
Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13 SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...
-
Best quality China Valve Manufacturer - DIN335...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
100% Original Factory 2 Way Ball Valve - 1pc T...
Product Video Product Description Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications. An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat. Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points. Features a blow-out p...
-
Hot New Products Cast Iron Check Valve - Stain...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Wholesale Discount Lug Style Valve - DIN3352-F...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...