English
    Banner-1

Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng

Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng Featured Image
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
  • Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng

Short Description:

  • sns02
  • sns03
  • whatsapp

dsv product2 egr
Download as PDF

Product Detail

Product Tags

Related Video

Feedback (2)

As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Y Type Ball Check Valve, Check Valve, Split Disc Check Valve, In case you are intrigued in any of our products or want to focus on a personalized get, please sense totally free to contact us. We're wanting ahead to forming successful enterprise relationships with new shoppers across the world during the in close proximity to long term.
Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng Detail:

Product Video

Product Description

Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the flow of water from bottom to top, and pay attention to whether the installation direction is correct during installation.

The wafer swing check valve is an economical alternative to the traditional flanged swing check valve. The lightweight wafer type valve consists of a 304 stainless steel disc, and on reverse flow will have a positive shutoff owing to the resilient seat.

  • Low Head Loss
  • Pressure rating – 16 Bar
  • Available in sizes 50mm – 400mm

We will uphold the “excellent quality, satisfactory service” purpose, and strive to become your ideal business partner.
For Factory directly DUCTILE IRON/CAST IRON WAFER SINGLE DISC CHECK VALVE PN16, we sincerely hope to establish some satisfactory associations along with you. We will keep you informed of our progress and establish a stable cooperative relationship with you.

Factory directly DIN or ANSI Single Plate Check Valve, Single Disc Check Valve, high output, good quality, timely delivery, to ensure your satisfaction.
We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order, please feel free to contact us, working with us will save you money and time.

Product Parameter

Product parameter2Product parameter1

NO. PART MATERIAL
1 Body GG25/GGG40/SS304/SS316
2 Ring Steel
3 Axle SS304/SS316
4 Spring Stainless steel
5 Gasket PTFE
6 Disc WCB/SS304/SS316
7 Seat ring NBR/EPDM/VITON
8 Gasket NBR
9 Screw Steel
NO. Part Material
DN(mm) 50 65 80 100 125 150 200 250 300 350 400
 L(mm) 44.5 47.6 50.8 57.2 63.5 69.9 73 79.4 85.7 108 108
ΦE(mm) 33 43 52 76 95 118 163 194 241 266 318
Φ(mm) PN10 107 127 142 162 192 218 273 328 378 438 489
PN16 107 127 142 162 192 218 273 329 384 446 498

Product Show

CAST IRON SINGLE DISC SWING CHECK VALVE
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734

Product detail pictures:

Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng detail pictures

Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng detail pictures

Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng detail pictures

Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Renewable Design for Wafer Type Swing Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Tunisia, Botswana, Japan, Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
    • The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
    5 Stars By Iris from Thailand - 2018.03.03 13:09
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
    5 Stars By Agustin from Belgium - 2017.03.07 13:42
    Write your message here and send it to us

    Related products

    • PriceList for C515 Gate Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng

      PriceList for C515 Gate Valve - DIN3352-F4 New...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...

      See more products >
    • China OEM Flanged Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng

      China OEM Flanged Check Valve - Thin Single Di...

      Product Video Product Description Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″ Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications. An economical test valve that saves room. Either vertically (only upwards) or horizontally installed. Key features: CF...

      See more products >
    • China Cheap price Lever Ball Valve - 1pc Threaded Ball Valve – Dongsheng

      China Cheap price Lever Ball Valve - 1pc Threa...

      Product Video Product Description Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications. An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat. Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points. Features a blow-out p...

      See more products >
    • Europe style for Wafer Spring Check Valve - Thin Single Disc Swing Check Valve – Dongsheng

      Europe style for Wafer Spring Check Valve - Th...

      Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2″ to 24“. Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Steel body Wafer P...

      See more products >
    • New Fashion Design for Threaded Ball Check Valve - Flanged Ball Check Valve – Dongsheng

      New Fashion Design for Threaded Ball Check Valv...

      Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...

      See more products >
    • OEM Factory for Saunders Weir Type Diaphragm Valve - Rising Stem Diaphragm Valve(Blue) – Dongsheng

      OEM Factory for Saunders Weir Type Diaphragm Va...

      Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. We’ll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of international top-grade and high-tech enterprises for New Style China DN300...

      See more products >
    Hit enter to search or ESC to close