PriceList for Rubber Diaphragm Valve - Rising Stem Diaphragm Valve(Blue) – Dongsheng
Short Description:
PriceList for Rubber Diaphragm Valve - Rising Stem Diaphragm Valve(Blue) – Dongsheng Detail:
Product Video
Product Description
Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems.
We’ll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of international top-grade and high-tech enterprises for New Style China DN300 Cast Iron Flange Rising Stem Diaphragm Valve, Welcome to visit us at any time to establish long-term business.
New Style China GG25 Diaphragm Valve, GGG40 Diaphragm Valve, Now we have gained a lot of recognition among customers spread all across the world. They trust us and always give us reorder.
Advantages of Diaphragm Valve
- Can be used as on-off and throttling service valves.
- Offer good chemical resistance due to a variety of linings available.
- Stem leakage is eliminated.
- Provides bubble-tight service.
- Does not have pockets to trap solids, slurries, and other impurities. It is suitable for slurries and viscous fluids.
- These valves are particularly suitable for hazardous chemicals and radioactive fluids.
- These valves do not permit contamination of flow medium, thus they are used extensively in food processing, pharmaceutical, brewing, and other applications which cannot tolerate any contamination.
Typical Application of Diaphragm Valves
- Clean or dirty water and air service applications
- Demineralized water systems
- Corrosive applications
- Radwaste systems in nuclear facilities
- Vacuum service
- Food processing, pharmaceutical, and brewing systems
Product parameter
| NO. | Part | Material |
| 1 | Body | GG25 |
| 2 | Lining | NR |
| 3 | Diaphragm | NR |
| 4 | Disc | GG25 |
| 5 | Bonnet | GG25 |
| 6 | Shaft | Steel |
| 7 | Sleeve | ABS |
| 8 | Sleeve | ABS |
| 9 | Handle | GGG40 |
| 10 | Pin | Steel |
| 11 | Bolt | Steel |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| L (mm) | 194 | 216 | 258 | 309 | 362 | 412 | 527 | 640 | 755 | |
| L1(mm) | 188 | 222 | 252 | 301 | 354 | 404 | 517 | 630 | 745 | |
| ΦE (mm) | 165 | 185 | 198 | 220 | 250 | 283 | 335 | 395 | 445 | |
| ΦD (mm)(EN1092-2) | PN10 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 |
| PN16 | 355 | 410 | ||||||||
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of PriceList for Rubber Diaphragm Valve - Rising Stem Diaphragm Valve(Blue) – Dongsheng , The product will supply to all over the world, such as: Turin, Bhutan, Bolivia, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We've got established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance might be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
By Alexandra from Belarus - 2018.12.25 12:43
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Janice from Sweden - 2017.08.28 16:02
Related products
-
Super Lowest Price Epdm Diaphragm Valve - Non-...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
-
New Fashion Design for Threaded Ball Check Valv...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Factory wholesale Dual Flap Check Valve - Wafe...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
China New Product Water Foot Valve - DIN3352-F...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Factory wholesale Diaphragm Valve Manufacturers...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
-
Manufacturing Companies for Single Disc Wafer C...
Product Video Product Description Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but al...