OEM/ODM Supplier Dual Plate Type Check Valve - DIN3202-F6 Swing Check Valve – Dongsheng
Short Description:
OEM/ODM Supplier Dual Plate Type Check Valve - DIN3202-F6 Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices.
Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed
Key features:
- Available sizes: 2″ up to 12″.
- Temperature range: -10°C to 120°C.
- Pressure rating: PN16 rated
- Low cracking pressure.
- WRAS approved.
- BS EN 1092-2.
Datasheet:
- Swing Check Valve
- Ductile Iron body
- Flanged PN16
- Sizes 2″ up to 12″
- WRAS approved
Product parameter
| NO. | Part | Material |
| 1 | Body | GG20/GG25/GGG40/GGG50 |
| 2 | Bonnet | GG20/GG25/GGG40/GGG50 |
| 3 | Disc | GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel |
| 4 | Seat | Brass/Bronze/Stainless steel |
| 5 | Pin | 2CR13 SS304 |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | |
| L | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | |
| D | PN10 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 |
| PN16 | 405 | |||||||||
| D1 | PN10 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 345 |
| PN16 | 355 | |||||||||
| D2 | PN10 | 88 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 |
| PN16 | ||||||||||
| b | PN10 | 14 | 14 | 14 | 17 | 17 | 19 | 19 | 22 | 23 |
| PN16 | 18 | 20 | 20 | 22 | 24 | 26 | 26 | 30 | 32 | |
| n-d | PN10 | 4-19 | 4-19 | 4-19 | 8-19 | 8-19 | 8-19 | 8-23 | 8-23 | 12-23 |
| PN16 | 12-23 | 12-28 | ||||||||
| H | 120 | 137 | 147 | 159 | 180 | 203 | 223 | 258 | 290 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for OEM/ODM Supplier Dual Plate Type Check Valve - DIN3202-F6 Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Afghanistan, Switzerland, Morocco, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Nelly from Nepal - 2017.09.22 11:32
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Gloria from Slovenia - 2017.01.11 17:15
Related products
-
Wholesale Discount Lug Style Valve - DIN3352-F...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Chinese Professional Cast Iron Swing Check Valv...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Factory Free sample Silent Check Valve - Wafer...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
Top Suppliers Cast Iron Ball Check Valve - BS5...
Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13 SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...
-
Cheapest Price Spring Loaded Non Return Valve -...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
OEM/ODM China Check Valve Manufacturer - Stain...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...