New Fashion Design for Threaded Ball Check Valve - Big Size Wafer Type Lift Check Valve – Dongsheng
Short Description:
New Fashion Design for Threaded Ball Check Valve - Big Size Wafer Type Lift Check Valve – Dongsheng Detail:
Product Video
Product Description
Check valves allow flow in one direction and automatically prevent flow in the opposite direction.
This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers.
It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very suitable for space-limited locations.
- Size: 5″ – 12″ (DN125 ~ DN300)
- Pressure: PN1.0Mpa ~ 4.0Mpa (Class150 ~ 300)
- Medium applicable: Water, Steam, Oil, Corrosive mediums containing nitric acid and urea etc.
Our products are widely regarded and trustworthy by customers and might meet constantly changing financial and social demands for Chinese Professional Big Size Wafer Lift Check Valve, We welcome new and old customers from all walks of life to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609 for future business relationships and mutual success!
Stainless Steel Wafer Type Lift Check Valve, we have now the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise: same top quality, better price; exact same selling price, higher quality.
Product Parameter
| NO. | PART | MATERIAL |
| 1 | Disc | CF8M |
| 2 | Body | CF8M |
| 3 | Guide | CF8M |
| 4 | Spring | Stainless Steel |
| DN(mm) | 125 | 150 | 200 | 250 | 300 |
| ΦE(mm) | 118 | 140 | 190 | 230 | 280 |
| C(mm) | 192 | 218 | 272 | 326 | 376 |
| ΦD(mm) | 192 | 218 | 280 | 340 | 400 |
| L | 90 | 106 | 140 | 145 | 160 |
| n-R | 12-R20 | 12-R20 | 12-R25 |
Product Show
Contact: Judy Email: info@lzds.cn phone/WhatsApp: +86 18561878609.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of New Fashion Design for Threaded Ball Check Valve - Big Size Wafer Type Lift Check Valve – Dongsheng , The product will supply to all over the world, such as: Montpellier, Guyana, Iran, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
By Myrna from Munich - 2018.09.16 11:31
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Mary from Colombia - 2017.04.18 16:45
Related products
-
China Manufacturer for Foot Valve With Strainer...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Massive Selection for Double Flange Butterfly V...
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...
-
New Fashion Design for Threaded Ball Check Valv...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
China OEM Weir Diaphragm Valve - Rising Stem D...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. We’ll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of international top-grade and high-tech enterprises for New Style China DN300...
-
OEM Manufacturer Ductile Iron Check Valve - Fl...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Wholesale Price Check Valve Wafer Type - Big S...
Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very ...