Manufacturer of Lug Check Valve - Flanged Ball Check Valve – Dongsheng
Short Description:
Manufacturer of Lug Check Valve - Flanged Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.
Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.
Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1 1/2″ up to 16″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
- Easily maintainable.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve
- Cast/Ductile Iron body
- NBR/EPDM seat
- Flanged PN16, PN10
- Sizes 1 1/2″ to 16″
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40 |
| 2 | Ball | Metal+ NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Bolt | Stainless Steel |
| 5 | Gasket | NBR/EPDM |
| DN(mm) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 900 | |
| H(mm) | 98 | 106 | 129 | 146 | 194 | 207 | 240 | 322 | 388 | 458 | 610 | 705 | |
| ΦD(mm) | PN10 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ350 | Φ400 | Φ460 | Φ515 |
| PN16 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ355 | Φ410 | Φ470 | Φ525 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Manufacturer of Lug Check Valve - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: Provence, Cape Town, kazakhstan, We've got sufficient experience in producing products according to samples or drawings. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together.
By Maud from Congo - 2017.11.20 15:58
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Ella from Seychelles - 2018.09.21 11:44
Related products
-
OEM/ODM Manufacturer Dual Plate Wafer Check Val...
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and Viton seal. Either vertically (only upwards) or horizontal...
-
Top Suppliers Cast Iron Ball Check Valve - Sta...
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and Viton seal. Either vertically (only upwards) or horizontal...
-
Factory wholesale Foot Valve - DIN3352-F4 New ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Wholesale Price 150mm Gate Valve - DIN3352-F4 ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Top Quality Wafer Swing Check Valve - Flanged ...
Product Video Product Description Cast Iron Flanged Silent Check Valve provides great sealing capacities for high and low pressure. In particular, industrial and HVAC applications, water, heating, air conditioning and compressed air devices are included. This cast iron flanged silent check valve comes in a body of Cast Iron, epoxy-coated, EPDM seat and Stainless Steel spring. These components make it an economical, secure Standard or Foot Check valve. The valve becomes a fully operational Foo...
-
Original Factory Lugged Butterfly Valve - Flan...
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...