Hot Selling for Wafer Silent Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng
Short Description:
Hot Selling for Wafer Silent Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment.
Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertical or horizontal piping.
Key features:
- Available in sizes: 2″ to 12“.
- Temperature range: -20°C to 200°C.
- Pressure rating: 10 Bar/16 Bar/25 Bar.
- Low cracking pressure.
- Space saving design.
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product show
Contact: Judy Email: info@lzds.cn phone/WhatsApp +86 18561878609
Product detail pictures:
Related Product Guide:
We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Hot Selling for Wafer Silent Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Tanzania, luzern, Norwegian, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.
By Lesley from Hungary - 2018.09.29 13:24
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By EliecerJimenez from United Kingdom - 2018.12.28 15:18
Related products
-
Competitive Price for Foot Valve For Water Pump...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Lowest Price for Spring Loaded Check Valve - W...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
Professional Design Flanged Foot Valve - DIN33...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
18 Years Factory Wafer Type Check Valve - Thre...
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...
-
Cheapest Factory Cast Iron Ball Valve - Iron F...
Product Video Product Description Specifications: Cast iron ball valve : Min Temperature : -20°C Cast iron ball valve : Max Temperature :+ 120°C Max Pressure : 16 Bars Specifications : Full bore Hollow stainless ball from DN 50 to DN 200 Ends : EN 1092-2 Flanges Materials : Body: Cast iron body – Cast iron EN GJL-250 Sphere: Stainless Sphere – SS 304 Stem seal with PTFE ring and O-ring EPDM Axis blow-out proof full bore With spacing DIN 3202 Product Parameter NO. Part Material 1 Bo...
-
Top Suppliers Lift Check Valve - Flanged Silen...
Product Video Product Description Cast Iron Flanged Silent Check Valve provides great sealing capacities for high and low pressure. In particular, industrial and HVAC applications, water, heating, air conditioning and compressed air devices are included. This cast iron flanged silent check valve comes in a body of Cast Iron, epoxy-coated, EPDM seat and Stainless Steel spring. These components make it an economical, secure Standard or Foot Check valve. The valve becomes a fully operational Foo...
