Hot New Products Cast Iron Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng
Short Description:
Hot New Products Cast Iron Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment.
Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertical or horizontal piping.
Key features:
- Available in sizes: 2″ to 12“.
- Temperature range: -20°C to 200°C.
- Pressure rating: 10 Bar/16 Bar/25 Bar.
- Low cracking pressure.
- Space saving design.
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Hot New Products Cast Iron Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Algeria, New Delhi, America, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Ina from Pakistan - 2017.11.20 15:58
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Sarah from Brasilia - 2018.11.02 11:11
Related products
-
Best Price for Single Plate Wafer Check Valve -...
Product Video Product Description Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but al...
-
PriceList for C515 Gate Valve - DIN3352-F4 Res...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
New Fashion Design for Threaded Ball Check Valv...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Original Factory Lugged Butterfly Valve - Wafe...
Product Video Product Description Dimensions: Size : DN 50 to DN 600 Ends : ANSI150/PN10/PN16/JIS10K Specifications: Type of valve: Butterfly valve wafer type Working temperature: EPDM -10℃-+120℃ Face to Face: ISO5752 sequence Upper flange standard: ISO5211 Pressure test conform: API598 Medium: Fresh Water, Sea Water, Food Stuff, all kinds of oil etc. Materials : Body: GGG-50 ductile iron body allows installation in ANSI 150 and DIN PN 10/16 pipe flanges. Disc: Stainless steel 304 (CF8)....
-
2021 wholesale price Ball Type Non Return Valve...
Product Description Application: The stainless ball valves from 1 piece is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: T max = 200 C PN: 10, 16...
-
100% Original Resilient Gate Valve - DIN3352-F...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...