Good Wholesale Vendors Split Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
Short Description:
Good Wholesale Vendors Split Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the flow of water from bottom to top, and pay attention to whether the installation direction is correct during installation.
The wafer swing check valve is an economical alternative to the traditional flanged swing check valve. The lightweight wafer type valve consists of a 304 stainless steel disc, and on reverse flow will have a positive shutoff owing to the resilient seat.
- Low Head Loss
- Pressure rating – 16 Bar
- Available in sizes 50mm – 400mm
We will uphold the “excellent quality, satisfactory service” purpose, and strive to become your ideal business partner.
For Factory directly DUCTILE IRON/CAST IRON WAFER SINGLE DISC CHECK VALVE PN16, we sincerely hope to establish some satisfactory associations along with you. We will keep you informed of our progress and establish a stable cooperative relationship with you.
Factory directly DIN or ANSI Single Plate Check Valve, Single Disc Check Valve, high output, good quality, timely delivery, to ensure your satisfaction.
We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order, please feel free to contact us, working with us will save you money and time.
Product Parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Good Wholesale Vendors Split Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Turin, luzern, Victoria, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
By Yannick Vergoz from Switzerland - 2017.06.19 13:51
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Maud from South Korea - 2017.10.23 10:29
Related products
-
Wholesale Ci Gate Valve - DIN3352-F4 Resilient...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
OEM manufacturer Ball Lift Check Valve - Flang...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
High Quality for Lined Diaphragm Valve - Risin...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm. These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our company sticks to the principle of “Quality is the life of the company, and reputation is the soul of it” for China DIN Flange Cast Iron Diaphragm Valve Rising Stem GG25 Body, All produ...
-
2021 China New Design Check Valve Double Door -...
Product Video Product Description Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices. Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed Key features: Available sizes: 2″ up to 12″. Temperature range: -10°C to 120°C. Pressure rating: PN16 rated Low crac...
-
Renewable Design for Wafer Type Swing Check Val...
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...
-
Quality Inspection for Flange Type Butterfly Va...
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl...