Fast delivery Wedge Gate Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng
Short Description:
Fast delivery Wedge Gate Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng Detail:
Product Video
Product Description
The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.
In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline.
The organization keeps on the procedure concept “scientific management, high quality and efficiency primacy, purchaser supreme for Quoted price for Double Flanged Resilient Gate Valve, DIN3202 F4, Non Rising Stem, When you are interested in any of our merchandise or would want to go over a custom made get, remember to feel totally free to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609.
Quoted price for DIN3352 Soft Seated Gate Valve, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
Product Parameter
| NO. | Part | Material |
| 1 | Body | GGG50 |
| 2 | Wedge | GGG50+NBR |
| 3 | Stem Nut | Brass |
| 4 | Gasket | EPDM |
| 5 | Bonnet | GGG50 |
| 6 | Stem | 2Cr13 |
| 7 | Bolt | 40Cr |
| 8 | O-ring | EPDM |
| 9 | Washer | PTFE |
| 10 | Nut | Brass |
| 11 | Anti-dust ring | EPDM |
| 12 | Handwheel | GGG50+NBR |
| 13 | Bolt | 40Cr |
| DN | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| L | F4 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 |
| F5 | 250 | 270 | 280 | 300 | 325 | 350 | 400 | 450 | 500 | |
| BS5163 GB | 178 | 190 | 203 | 229 | 254 | 267 | 292 | 330 | 356 | |
| D | PN10 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 |
| PN16 | 405 | 460 | ||||||||
| D1 | PN10 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 |
| PN16 | 355 | 410 | ||||||||
| D2 | PN10 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 | 370 |
| PN16 | 378 | |||||||||
| b | F4/F5/BS5163 | 19 | 19 | 19 | 19 | 19 | 19 | 20 | 22 | 24.5 |
| n-d | PN10 | 4-19 | 4-19 | 8-19 | 8-19 | 8-19 | 8-23 | 8-23 | 12-23 | 12-23 |
| PN16 | 12-23 | 12-26 | 12-26 | |||||||
| H | F4/F5/BS5163 | 225 | 250 | 285 | 330 | 360 | 410 | 490 | 565 | 670 |
| C | F4/F5/BS5163 | 160 | 180 | 200 | 200 | 250 | 250 | 280 | 320 | 350 |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
We always work as a tangible team to ensure that we can provide you with the best quality and the best price for Fast delivery Wedge Gate Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: luzern, kazan, Somalia, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Ella from New Zealand - 2017.10.23 10:29
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Claire from Brunei - 2017.12.02 14:11
Related products
-
Bottom price Double Wafer Check Valve - Stainl...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
High Quality Api 594 Check Valve - Cast Iron S...
Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to ...
-
Low price for Os&Y Gate Valve - DIN3352-F4...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Factory For Nodular Cast Iron Butterfly Valve -...
Product Video Product Description Dimensions: Size : DN 50 to DN 600 Ends : ANSI150/PN10/PN16/JIS10K Specifications: Type of valve: Butterfly valve wafer type Working temperature: EPDM -10℃-+120℃ Face to Face: ISO5752 sequence Upper flange standard: ISO5211 Pressure test conform: API598 Medium: Fresh Water, Sea Water, Food Stuff, all kinds of oil etc. Materials : Body: GGG-50 ductile iron body allows installation in ANSI 150 and DIN PN 10/16 pipe flanges. Disc: Stainless steel 304 (CF8)....
-
Professional Design Flanged Foot Valve - DIN33...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
New Fashion Design for Stainless Steel Check Va...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...