Factory wholesale Disc Check Valve - Flanged Ball Check Valve – Dongsheng
Short Description:
Factory wholesale Disc Check Valve - Flanged Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.
Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.
Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1 1/2″ up to 16″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
- Easily maintainable.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve
- Cast/Ductile Iron body
- NBR/EPDM seat
- Flanged PN16, PN10
- Sizes 1 1/2″ to 16″
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40 |
| 2 | Ball | Metal+ NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Bolt | Stainless Steel |
| 5 | Gasket | NBR/EPDM |
| DN(mm) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 900 | |
| H(mm) | 98 | 106 | 129 | 146 | 194 | 207 | 240 | 322 | 388 | 458 | 610 | 705 | |
| ΦD(mm) | PN10 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ350 | Φ400 | Φ460 | Φ515 |
| PN16 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ355 | Φ410 | Φ470 | Φ525 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Factory wholesale Disc Check Valve - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: Cologne, Albania, Mongolia, Welcome to visit our company, factory and our showroom where displays various hair products that will meet your expectation. Meanwhile, it is convenient to visit our website, and our sales staff will try their best to provide you the best service. Please contact us if you need more information. Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation.
By Gwendolyn from Miami - 2018.12.11 14:13
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Beryl from Thailand - 2018.11.02 11:11
Related products
-
Super Purchasing for Centerline Butterfly Valve...
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl...
-
Reasonable price Double Disc Wafer Check Valve ...
Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...
-
Best quality 2.5 Gate Valve - DIN3352-F4 New S...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Manufacturer for Stainless Steel Ball Valve - ...
Product Description Application: The stainless ball valves from 1 piece is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: T max = 200 C PN: 10, 16...
-
Trending Products Waste Water Check Valve - Ca...
Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to ...
-
Renewable Design for Wafer Type Swing Check Val...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...