Factory Promotional 3 Piece Ball Valve - 1pc Threaded Ball Valve – Dongsheng
Short Description:
Factory Promotional 3 Piece Ball Valve - 1pc Threaded Ball Valve – Dongsheng Detail:
Product Video
Product Description
Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications.
An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat.
Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points.
Features a blow-out proof stem and insulated grip, lockable lever handle.
Specifications:
- Screwed BSP or NPT
- CF8/CF8M Stainless Steel valve body
- PTFE Seat
- Sizes: 1/4″ to 2″
- Working Temperature: -20°C to +180°C
- Working P: 1000 PSI WOG
- Movement: 90° turn
- Investment cast with low torque
Datasheet:
- Full Bore, One Piece
- CF8M Stainless Steel valve body
- Screwed BSP or NPT
- Sizes: 1/4″ to 2″
- Working Temperature: -20°C to +180°C
- 800 PSI Rated
Product parameter
| NO. | Part | Material |
| 1 | BODY | CF8M |
| 2 | CAP | CF8M |
| 3 | SEAT | PTFE |
| 4 | BALL | 316 |
| 5 | STEM | 316 |
| 6 | THRUST WASHER | PTFE |
| 7 | PACKING | PTFE |
| 8 | GLAND NUT | 304 |
| 9 | HANDLE | 304 |
| 10 | HANDLE COVER | PLASTIC |
| 11 | NUT | 304 |
| 12 | SPRING WASHER | 304 |
| SIZE | d | L | H | W | N.M | KGS | |
| DN6 | 1/4″ | 5 | 40 | 33 | 67 | 4 | 0.06 |
| DN10 | 3/8″ | 7 | 44 | 36 | 67 | 4 | 0.08 |
| DN15 | 1/2″ | 9 | 57 | 37 | 93 | 6 | 0.16 |
| DN20 | 3/4″ | 12.5 | 59 | 42 | 93 | 6 | 0.26 |
| DN25 | 1″ | 15 | 71 | 52 | 103 | 8 | 0.38 |
| DN32 | 1-1/4″ | 20 | 78 | 56 | 103 | 10 | 0.65 |
| DN40 | 1-1/2″ | 25 | 82 | 65 | 125 | 14 | 0.86 |
| DN50 | 2″ | 32 | 100 | 70 | 125 | 15 | 1.4 |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Factory Promotional 3 Piece Ball Valve - 1pc Threaded Ball Valve – Dongsheng , The product will supply to all over the world, such as: America, Croatia, Uruguay, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
By Carey from United Arab emirates - 2017.02.18 15:54
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Anna from Seychelles - 2018.06.30 17:29
Related products
-
Hot Sale for Stainless Steel Wafer Check Valve ...
Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very ...
-
Well-designed Wafer Type Single Disc Swing Chec...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
High Quality for Lined Diaphragm Valve - Non-R...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
-
100% Original Resilient Gate Valve - DIN3352-F...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Low price for Os&Y Gate Valve - DIN3352-F4...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Manufacturer of Lug Check Valve - Wafer Silent...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...