China Supplier Wafer Type Non Return Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng
Short Description:
China Supplier Wafer Type Non Return Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng Detail:
Product Video
Product Description
The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.
In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline. Please feel free to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609.
Product parameter
| NO. | Part | Material |
| 1 | Body | GGG40/GGG50 |
| 2 | Bonnet | GGG40/GGG50 |
| 3 | Stem | 2Cr13/SS304/SS316/Brass |
| 4 | Disc | GGG40/GGG50 with NBR/EPDM |
| 5 | Stem Nut | Brass |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
| L | 140 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | |
| D | PN10 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 615 | 670 |
| PN16 | 405 | 460 | 520 | 580 | 640 | 715 | |||||||||
| D1 | PN10 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 | 460 | 515 | 565 | 620 |
| PN16 | 355 | 410 | 470 | 525 | 585 | 650 | |||||||||
| D2 | PN10 | 88 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 | 370 | 430 | 482 | 530 | 586 |
| PN16 | 378 | 438 | 490 | 548 | 610 | ||||||||||
| b | 17 | 17 | 17 | 17 | 19 | 19 | 19 | 22 | 23 | 26 | 28 | 30 | 30 | 32 | |
| n-d | PN10 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 8-22 | 12-22 | 12-22 | 16-22 | 16-26 | 20-26 | 20-26 |
| PN16 | 12-22 | 12-28 | 12-28 | 16-26 | 16-30 | 20-30 | 20-34 | ||||||||
| H | PN10 | 200 | 215 | 245 | 285 | 320 | 360 | 415 | 445 | 585 | 670 | 980 | 1144 | 1250 | 1366 |
| PN16 | 480 | ||||||||||||||
| C | 160 | 160 | 180 | 200 | 200 | 250 | 250 | 280 | 320 | 350 | 350 | 500 | 500 | 500 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-18561878609
Product detail pictures:
Related Product Guide:
Our aim would be to fulfill our shoppers by offering golden company, very good value and good quality for China Supplier Wafer Type Non Return Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: Bolivia, United Kingdom, Cambodia, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Kelly from Czech republic - 2018.09.23 18:44
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Caroline from Haiti - 2018.06.03 10:17
Related products
-
Manufacturing Companies for Single Disc Wafer C...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
High Quality Api 594 Check Valve - Stainless S...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Chinese wholesale Stainless Steel Thread Ball V...
Product Video Product Description Specifications: Cast iron ball valve : Min Temperature : -20°C Cast iron ball valve : Max Temperature :+ 120°C Max Pressure : 16 Bars Specifications : Full bore Hollow stainless ball from DN 50 to DN 200 Ends : EN 1092-2 Flanges Materials : Body: Cast iron body – Cast iron EN GJL-250 Sphere: Stainless Sphere – SS 304 Stem seal with PTFE ring and O-ring EPDM Axis blow-out proof full bore With spacing DIN 3202 Product Parameter NO. Part Material 1 Bo...
-
High reputation Dual Disc Check Valve - Stainl...
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and Viton seal. Either vertically (only upwards) or horizontal...
-
Personlized Products Ductile Iron Butterfly Val...
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl...
-
factory customized Ball Valve - 1pc Threaded B...
Product Video Product Description Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications. An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat. Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points. Features a blow-out p...