China OEM Weir Diaphragm Valve - Non-Rising Stem Diaphragm Valve – Dongsheng
Short Description:
China OEM Weir Diaphragm Valve - Non-Rising Stem Diaphragm Valve – Dongsheng Detail:
Product Video
Product Description
Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems.
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of DIN Non Rising Stem Gate Valve, rubber lined. “Make Values, Serving Customer” is definitely the purpose we pursue. We sincerely hope that all consumers will build long-lasting and mutually valuable cooperation with us.Should you wish to get extra details about our business, Please get hold of with us now.
China Cheap price cast iron diaphragm valve, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609.
Advantages
- Can be used as on-off and throttling service valves.
- Offer good chemical resistance due to a variety of linings available.
- Stem leakage is eliminated.
- Provides bubble-tight service.
- Does not have pockets to trap solids, slurries, and other impurities. It is suitable for slurries and viscous fluids.
- These valves are particularly suitable for hazardous chemicals and radioactive fluids.
- These valves do not permit contamination of flow medium, thus they are used extensively in food processing, pharmaceutical, brewing, and other applications which cannot tolerate any contamination.
Typical Application
- Clean or dirty water and air service applications
- Demineralized water systems
- Corrosive applications
- Radwaste systems in nuclear facilities
- Vacuum service
- Food processing, pharmaceutical, and brewing systems
Product parameter
| NO. | Part | Material |
| 1 | Body | GG25 |
| 2 | Lining | NR |
| 3 | Diaphragm | NR |
| 4 | Disc | GG25 |
| 5 | Bonnet | GG25 |
| 6 | Shaft | Steel |
| 7 | Sleeve | ABS |
| 8 | Sleeve | ABS |
| 9 | Handle | GGG40 |
| 10 | Pin | Steel |
| 11 | Bolt | Steel |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
| L (mm) | 194 | 216 | 258 | 309 | 362 | 412 | 527 | 640 | 755 | |
| L1(mm) | 188 | 222 | 252 | 301 | 354 | 404 | 517 | 630 | 745 | |
| ΦE (mm) | 165 | 185 | 198 | 220 | 250 | 283 | 335 | 395 | 445 | |
| ΦD (mm)(EN1092-2) | PN10 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 |
| PN16 | 355 | 410 | ||||||||
Product Show
Product detail pictures:
Related Product Guide:
With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for China OEM Weir Diaphragm Valve - Non-Rising Stem Diaphragm Valve – Dongsheng , The product will supply to all over the world, such as: Johannesburg, New Zealand, Nicaragua, We welcome customers from all over the world come to discuss business. We supply high quality products, reasonable prices and good services. We hope to sincerely build business relationships with customers from at home and abroad, jointly striving for a resplendent tomorrow.
By Hannah from Lebanon - 2017.06.19 13:51
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Miranda from Hungary - 2017.03.28 16:34
Related products
-
18 Years Factory Wafer Type Check Valve - Flan...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Newly Arrival Suction Foot Valve - DIN3352-F4 ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
8 Year Exporter Single Disc Check Valve - Wafe...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
Factory Supply Double Flanged Dual Plate Check ...
Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very ...
-
8 Year Exporter Dual Plate Valve – DIN335...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Good User Reputation for Foot Valve Of Pump - ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...