China Factory for Wafer Style Check Valve - Flanged Ball Check Valve – Dongsheng
Short Description:
China Factory for Wafer Style Check Valve - Flanged Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.
Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.
Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1 1/2″ up to 16″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
- Easily maintainable.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve
- Cast/Ductile Iron body
- NBR/EPDM seat
- Flanged PN16, PN10
- Sizes 1 1/2″ to 16″
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40 |
| 2 | Ball | Metal+ NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Bolt | Stainless Steel |
| 5 | Gasket | NBR/EPDM |
| DN(mm) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 900 | |
| H(mm) | 98 | 106 | 129 | 146 | 194 | 207 | 240 | 322 | 388 | 458 | 610 | 705 | |
| ΦD(mm) | PN10 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ350 | Φ400 | Φ460 | Φ515 |
| PN16 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ355 | Φ410 | Φ470 | Φ525 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: +86 18561878609.
Product detail pictures:
Related Product Guide:
Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for China Factory for Wafer Style Check Valve - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: India, Swedish, Comoros, During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
By Yannick Vergoz from Riyadh - 2017.03.08 14:45
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Elva from Gabon - 2017.01.28 18:53
Related products
-
High reputation Dual Disc Check Valve - Thin S...
Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2″ to 24“. Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Steel body Wafer P...
-
2021 Latest Design Wafer Lug Check Valve - Sta...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Factory source Disco Check Valve - Wafer Silen...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
Manufacturing Companies for Dual Plate Wafer Ch...
Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13 SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...
-
2021 China New Design Steel Ball Valves - 3pcs...
Product Video Product Description Application: As their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Medium can flow in both directions through the ball valves. Technical description: T max = 200 C PN: 63 made of stainless steel 3-pc design investment castings full bore – to minimize pressure losses soft-sealing seats floating ball Our primary objective is always t...
-
New Arrival China Check Valve Non Return Valve ...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...