100% Original Resilient Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng
Short Description:
100% Original Resilient Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng Detail:
Product Video
Product Description
The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.
In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline.
Product parameter
| NO. | Part | Material |
| 1 | Body | GGG40/GGG50 |
| 2 | Bonnet | GGG40/GGG50 |
| 3 | Stem | 2Cr13/SS304/SS316/Brass |
| 4 | Disc | GGG40/GGG50 with NBR/EPDM |
| 5 | Stem Nut | Brass |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
| L | 140 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | |
| D | PN10 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 615 | 670 |
| PN16 | 405 | 460 | 520 | 580 | 640 | 715 | |||||||||
| D1 | PN10 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 | 460 | 515 | 565 | 620 |
| PN16 | 355 | 410 | 470 | 525 | 585 | 650 | |||||||||
| D2 | PN10 | 88 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 | 370 | 430 | 482 | 530 | 586 |
| PN16 | 378 | 438 | 490 | 548 | 610 | ||||||||||
| b | 17 | 17 | 17 | 17 | 19 | 19 | 19 | 22 | 23 | 26 | 28 | 30 | 30 | 32 | |
| n-d | PN10 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 8-22 | 12-22 | 12-22 | 16-22 | 16-26 | 20-26 | 20-26 |
| PN16 | 12-22 | 12-28 | 12-28 | 16-26 | 16-30 | 20-30 | 20-34 | ||||||||
| H | PN10 | 200 | 215 | 245 | 285 | 320 | 360 | 415 | 445 | 585 | 670 | 980 | 1144 | 1250 | 1366 |
| PN16 | 480 | ||||||||||||||
| C | 160 | 160 | 180 | 200 | 200 | 250 | 250 | 280 | 320 | 350 | 350 | 500 | 500 | 500 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for 100% Original Resilient Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: Sydney, Swaziland, Morocco, Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!
By Kelly from Iran - 2018.05.13 17:00
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Doreen from Riyadh - 2017.03.07 13:42
Related products
-
Manufacturer of Single Door Check Valve - Stai...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Factory wholesale Dual Flap Check Valve - Smal...
Product Video Product Description Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but al...
-
Factory Supply Double Flanged Dual Plate Check ...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
OEM manufacturer Ball Lift Check Valve - Threa...
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...
-
Hot Sale for Wafer Lift Check Valve - Flanged ...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Factory Cheap Hot Check Valve - Thin Single Di...
Product Video Product Description Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″ Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications. An economical test valve that saves room. Either vertically (only upwards) or horizontally installed. Key features: CF...