100% Original Double Plate Check Valve - Wafer Silent Check Valve – Dongsheng
Short Description:
100% Original Double Plate Check Valve - Wafer Silent Check Valve – Dongsheng Detail:
Product Video
Product Description
The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal.
The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 125# or 250# flanges. For 8″ to 10″ diameters, a 250# wafer design is also available for mating to 250# flanges. Also available with grooved end adapters.
- It is recommended that valves be installed 7 to 10 pipe lengths away from the turbulence.
- *12” size has special full lug pattern.
- Consult factory for optional construction materials and installation instructions. Optional resilient seating of NBR or EPDM available for 6” size and larger.
Note: Manufacturer reserves the right to modify dimensions, materials, or design. Consult factory for certification.
We preserve enhancing and perfecting our goods and service. At the same time, we operate actively to do research and growth for Wafer Silent Check Valve. You will be most welcome to come to China, to our city and to our manufacturing facility! Our company will continue to adhere to the “superior quality, reputable, the user first ” principle wholeheartedly, warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!
Product parameter
| NO. | Part | Material |
| 1 | Body | GG25/GGG40 |
| 2 | Guide | SS304/SS316 |
| 3 | Disc | SS304/SS316 |
| 4 | O-ring | NBR/EPDM |
| 5 | Seat ring | NBR/EPDM |
| 6 | Bolts | SS304/SS316 |
| 7 | Sleeve | SS304/SS316 |
| 8 | Spring | SS304/SS316 |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
| L (mm) | 67 | 73 | 79 | 102 | 117 | 140 | 165 | 210 | 286 |
| ΦD(mm) | 59 | 80 | 84 | 112 | 130 | 164 | 216 | 250 | 300 |
| ΦB (mm) | 108 | 127 | 146 | 174 | 213 | 248 | 340 | 406 | 482 |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for 100% Original Double Plate Check Valve - Wafer Silent Check Valve – Dongsheng , The product will supply to all over the world, such as: Netherlands, Victoria, European, Our company mission is that providing high quality and beautiful products with reasonable price and strive to gain 100% good reputation from our clients. We believe Profession achieves excellence! We welcome you to cooperate with us and grow up together.
By Elma from Sweden - 2017.10.27 12:12
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Helen from Latvia - 2018.02.12 14:52
Related products
-
Manufactur standard Disc Type Check Valve - Ca...
Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...
-
2021 Latest Design Wafer Lug Check Valve - Sta...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
New Fashion Design for Stainless Steel Check Va...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
8 Year Exporter Dual Plate Valve – DIN335...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Factory wholesale Dual Flap Check Valve - Big ...
Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very ...
-
Good User Reputation for Foot Valve Of Pump - ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...