Top Suppliers Lift Check Valve - Threaded Ball Check Valve – Dongsheng
Short Description:
Top Suppliers Lift Check Valve - Threaded Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve.
Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated aluminum ball.
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1″ up to 3″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN10 rated
- Easy to maintain and install.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve with Ductile Iron body
- NBR/EPDM seat
- Threaded BSP
Product parameter
| NO. | Part | Material |
| 1 | Body | GG25/GGG40 |
| 2 | Gasket | NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Ball | NBR/EPDM |
| 5 | Bolt | Stainless steel |
| 6 | Nut | Stainless steel |
| DN(mm) | 25 | 32 | 40 | 50 | 65 | 80 |
| L(mm) | 125 | 132 | 145 | 174 | 200 | 243 |
| H(mm) | 75 | 75 | 85 | 126 | 113 | 165 |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for Top Suppliers Lift Check Valve - Threaded Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: Cancun, Turkmenistan, Dominica, Profession, Devoting are always fundamental to our mission. We've got always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.
By Page from Georgia - 2018.12.30 10:21
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Cheryl from Jakarta - 2018.12.05 13:53
Related products
-
Quality Inspection for Flange Type Butterfly Va...
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...
-
Hot sale Double Disc Swing Check Valve - Wafer...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
18 Years Factory Wafer Type Check Valve - Stai...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Wholesale Double Disc Check Valve - Threaded B...
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...
-
OEM/ODM Supplier Dual Plate Type Check Valve -...
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and Viton seal. Either vertically (only upwards) or horizontal...
-
Renewable Design for Wafer Type Swing Check Val...
Product Video Product Description Cast Iron Flanged Silent Check Valve provides great sealing capacities for high and low pressure. In particular, industrial and HVAC applications, water, heating, air conditioning and compressed air devices are included. This cast iron flanged silent check valve comes in a body of Cast Iron, epoxy-coated, EPDM seat and Stainless Steel spring. These components make it an economical, secure Standard or Foot Check valve. The valve becomes a fully operational Foo...
